With the arrival of smart home, people get attracted to this Reset Merkury smart bulb due to its reasonable cost and simplicity to use. However, affirming the fact that like other devices, at one point or another, you may require performing a WMI reset. Whether you are having difficulties in establishing a connection with your Merkury Smart Bulb or changing the connection for a new network, this guide is perfect for you as it will explain how to reset Merkury Smart Bulb.
Why You Might Need to Reset Merkury smart bulb
Now, before we proceed to the reset steps, it will be useful to know what scenarios will require you to reset your smart bulb. Here are a few common reasons: Here are a few common reasons:
1. Connectivity Issues: In addition, if your bulb is not picking commands from the application or the voice assistant, then the reset will help them to connect again.
2. New Network Setup: Smart bulb requires to be reprogrammed with a new network when you relocate to a new home or change your Wi-Fi network.
3. Troubleshooting Bugs: Sometimes, you may be shocked to find that the bulb is, for example, pulsing or it does not change color as expected. Erasing can remove such bugs as I preferred to call them.
4. Selling or Giving Away: If you are giving the bulb to the other person, then various settings set by you will be erased from the bulb.
Steps to Reset Merkury smart bulb
To reset the Merkury Smart Bulb, firstly, turn the device off, then on. Follow these steps to perform a factory reset: Follow these steps to perform a factory reset:
1. Switch the Light Off and On
First of all, make sure that the smart bulb you’re going to adjust is turned on. To trigger the process of the reset you have to switch the appliance on and then off for several times.
2. Perform the On/Off Cycle
The ability of resetting the Merkury Smart Bulb entails a command sequence of switching on and switching off the bulb. Here’s how you do it: Here’s how you do it:
*Flick the switch of the bulb for 1-2 seconds.
*Flip on the bulb for 1-2 seconds.
*Perform this process 3 more times.
Therefore, you would have switched the bulb off and on four times.
3. Find the flashing light.removeListener the flashing light
Once you have done the on/off cycles, the bulb should be blinking. This shows that the bulb has gone to reset mode if I am not mistaken. The pattern of the flashes may vary between different models, but nonetheless, the type of flashing will be fast.
4. Reconnect the Bulb
Once you see the bulb blinking, it is now time to pair the bulb again. Turn to your smartphone or tablet and launch the Merkury Smart app (or the Geeni app if your device is of that Model). Navigate to the settings and go through the on-screen guide on how to add a new device. Make sure that the particular device is linked to a 2. 4 GHz Wi-Fi network since most smart bulbs do not allow the 5 GHz network to be selected for connectivity.
5. Follow In-App Instructions
This ought to help you in establishing the smart bulb to your Wi-Fi network, which the app will assist you in. It will ask you to input you Wi-Fi information and perhaps, the name of your bulb that you wish to be associated with it.
6. Confirm the Reset
Once you’re done with the setup, your Merkury Smart Bulb should work in response to the app or any associated voice assistants such as Google Assistant or Amazon Alexa among others. Check the bulb to see whether or not it is operating as it should.
Also read : ‘No Signal on TV’
Tips for a Successful Reset Merkury smart bulb
- Ensure Stable Power: Ensure that the bulb is well powered while doing the reset so that it can perform well.
- Close Proximity: This is important to avoid signal problems that could be experienced in the course of the process Perform the reset and reconnection process close to your Wi-Fi router, most especially if the areas mentioned above can limit your movements.
- Correct Timing: This is something we are going to discuss in details later, but it should be noted that the timing is critical when it comes to on/off cycle. In case the bulb will not reset the first time, repeat the process again, each cycle should be 1-2 seconds.
Troubleshooting
If you encounter any issues during the reset process, here are a few troubleshooting tips: If you encounter any issues during the reset process, here are a few troubleshooting tips:
• No Flashing Light: I have also described the timing of each cycle that should be followed if the bulb fails to start flashing after the on/off cycles. Continue the process, thereby making sure that the contacts ‘on’ and ‘off’ last for 1-2 seconds.
• Cannot Connect to Wi-Fi: Before driving make sure that your device is cuffed to a 2. the 4 GHz network and that you are typing the correct Wi-fi password.
• App Issues: If your app isn’t working, or freezes, close your phone or uninstall and reinstall the app.
Conclusion
How to Reset Merkury smart bulb depends on the issue you are facing; however, resetting is very straightforward and can help with any issues, including connectivity or new network setup. Thus, following the outlined steps, the bulb and the app will be connected, and the person can continue to manage their smart home. If you still experiences some problems, consulting the manual or reaching Merkury support service will give you a hand. Happy smart lighting!